Table of Contents
Advertisement
ATA Routing Field Reference
WAN Setup page
WAN Setup page
ATA Administration Guide
Current Time
Broadcast Pkts Sent
Broadcast Bytes Sent
Broadcast Pkts Recv
Broadcast Bytes Recv
Broadcast Pkts
Dropped
Broadcast Bytes
Dropped
You can use the WAN Setup page to enter the WAN connection settings. This
page includes the following sections:
•
"Internet Connection Settings section," on page113
•
"Static IP Settings section," on page114
•
"PPPoE Settings section," on page114
•
"Optional Settings section," on page115
•
"MAC Clone Settings section," on page116
•
"Remote Management section," on page116
•
"QOS Settings section," on page116
•
"VLAN Settings section," on page117
Router tab > WAN Setup page >
Internet Connection Settings section
Connection Type
Current date and time of the system; for example, 10/3/
2003 16:43:00.
Total number of broadcast packets sent.
Total number of broadcast packets received.
Total number of broadcast bytes sent.
Total number of broadcast bytes received and
processed.
Total number of broadcast packets received but not
processed.
Total number of broadcast bytes received but not
processed.
The type of WAN connection. Options are: DHCP, Static
IP, PPPoE, PPPoE / DHCP (tries PPPoE then DHCP), or
DHCP/ PPPoE (tries DHCP then PPPoE).
A
113
Advertisement
Table of Contents
