I Dup/Tone Set Mode Items - Icom IC-91A Instruction Manual

D D Memory bank link function
Sets the memory bank link function ON
link function provides continuous bank scan, scanning all con-
tents in the selected banks during bank scan.
• Bank link setting
q Rotate [DIAL]
† to select the bank that you want to change.
r
w Push [ï](5)
† to enter bank setting.
e Rotate [DIAL]
† to select the setting.
r
r Push [ï](5)
† to set and return to the BANK LINK screen.
t Rotate [DIAL] to select next bank and repeat steps w to
†
r, or push [MENU/LOCK] to exit scan set mode.
[DIAL] ↔ [∫ ∫ ](2)/[√ √ ](8)
†
and OFF. The
(default)
\
r
r
[ï](5) ↔ [≈ ≈ ](6)
MENU SCREEN OPERATION

I DUP/TONE set mode items

D D Offset frequency
Sets the offset frequency for duplex
0 to 159.995 MHz range.
The default value may differ according to the selected fre-
quency band
(before accessing DUP/TONE set mode)
ceiver version.
The selected tuning step in VFO mode is used for setting
the offset frequency.
D D Repeater tone frequency
Selects subaudible tone frequency for accessing a repeater,
etc. Total of 50 tone frequencies
11
operation within
(repeater)
and trans-
are available.
(67.0–254.1 Hz)
(default: 88.5)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
97