Connectors Overview - Renesas RH850/U2A 292pin User Manual

RH850/U2A 292pin
2.2

Connectors Overview

The following table provides an overview of all connectors.
Table 2.2 Connectors overview (cont'd)
Connector Function
CN1 Main Board connectors
CN2
CN3
CN4 Debug connector
CN5 RHSIF & MSPI connector
CN6 Ethernet interface connector
CN7 Signaling LEDs pin header
CN8 GND for external power supply
CN9 +5.0 V external power supply
CN10 +3.3 V external power supply
CN11 +1.12 V external power supply *
CN12 Pull-up/Pull-down pin header
CN13 Device ports connectors
CN14
CN15
CN16
CN17 Ethernet interface connector
CN20 GPIO/LED output
Note: * Refer to 3.3 Device Core Voltage (VDD) Selection for further details about VDD voltage.
R20UT4545ED0102 Rev.1.02
May 27, 2021
2. Jumpers, Connectors and LEDs
Remark
refer to 7.1 Connectors to the Main Board CN1
to CN3
refer to 5 Debug and Flash Programming
Interfaces and 7.2 Debug Connector CN4
refer to 6.6 Renesas High-Speed Serial I/F
(RHSIF) / Multichannel Serial Peripheral
Interface (MSPI) and 7.3 RHSIF/MSIP
Connector CN5
refer to 6.5 Automotive Ethernet Interface and
7.6 Ethernet Connector CN6 and CN17
refer to 6.3 Signaling LEDs
refer to 3.1 Board Power Connection,
connectors are not assembled on the board
refer to 6.4 Pull-Up/Pull-Down Pin Header and
7.5 Pull-Up/Pull-Down Pin Header CN12
refer to 7.4 Device Ports Connectors CN13 to
CN16
refer to 6.5 Automotive Ethernet Interface and
7.6 Ethernet Connector CN6 and CN17
Refer to 7.7 GPIO/LED Connector CN20
Page 15 of 58