Mounting Of The Device - Renesas RH850/U2A 292pin User Manual

RH850/U2A 292pin
1.5

Mounting of the Device

The board is designed for use with the following devices:
•
R7F702300EABA (RH850/U2A16)
•
R7F702301EABG (RH850/U2A8)
The device must be placed inside the socket IC1. To insert the device, align the device package A1 pin with the marking
of the socket.
The A1pin of the socket is marked with a circle near to the "IC1" label (see also white point in Figure 1.1 Piggyback
board top view).
The A1 pin of the device is marked by a white triangle on the package (see white circle in the figure below).
Figure 1.5 Enplas OTB-292(841R)-0.8-099-00 socket with mounted device
CAUTION
Be careful with the device placement in the socket to avoid damage of the device.
R20UT4545ED0102 Rev.1.02
May 27, 2021
1. Overview
Page 10 of 58