How To Replace The Vdi Filter - Dantherm Silencio 600 Service Manual

How to replace the VDI filter

Product
description
When to replace
Part number
Tools
Caution!
Illustration
40
The VDI filter ensures that dirt from the ambient air is not let through to the electronic
equipment.
The filter only needs to be replaced when it is faulty, very filthy or as a part of the
preventive maintenance. Dantherm Air Handling A/S recommends a replacement of the
VDI filter in a maximum interval of 6 months.
The filter can be ordered under part number 296074.
Make sure you have the following tools available before you start:
• Torx 25 screw driver – for replacement from the external side
• Only trained and certified technicians are allowed to replace parts
• Switch of both the DC and AC supply before working on the unit
• Make sure that all work has been performed before switching on the power again
This drawing illustrates the filter and where the filter is placed in the unit.
Continued overleaf