Table of Contents
Advertisement
Mounting,
Procedure,
continued
28
continued
Step
9
Seal the top of the unit with fluid
sealant
Loosen the pallet underneath the
Silencio unit by removing the 2
mounting brackets in each side of
the unit.
Be careful when the pallet falls
down
10
Mount the two support brackets on
the wall brackets by tightening the:
• upper bolt (enclosed) that goes
through both the bracket and
the bracket fitting
• lower bolt (enclosed)
This bolt makes it possible to
fine adjust the height of the
bracket
11
Tighten (optional) the unit with
screws. 2 screws on each support
bracket at the bottom
Mounting holes
Action
.
Continued overleaf
Advertisement
Table of Contents
