How To Replace The Eprom - Dantherm Silencio 600 Service Manual

How to replace the EPROM

Introduction
When to replace
Part number
Tools
Caution!
Illustration
64
The EPROM contains the program for the controller.
The EPROM only needs to be replaced when it is faulty.
The EPROM can be ordered under part number 296084.
Make sure you have the following tools available before you start:
• Cross-point screwdriver
• EPROM-tong
• Only trained and certified technicians are allowed to replace parts.
• Switch of both the DC and AC supply before working on the unit.
• Make sure that all work has been performed before switching on the power again.
This drawing illustrates the EPROM and where it is placed in the unit:
Print EPROM
Continued overleaf