How To Replace The Thermostat For The Heating Element - Dantherm Silencio 600 Service Manual

How to replace the thermostat for the heating element

Product
description
When to replace
Part number
Tools
Caution!
Illustration
68
The thermostat makes sure that the heater cuts out at a too high temperature.
The thermostat only needs to be replaced when it is faulty.
The thermostat can be ordered under part number 296096.
Make sure you have the following tools available before you start:
• Torx 25 screwdriver
• Side-cutting nippers
• Pop rivet tongs
• Only trained and certified technicians are allowed to replace parts.
• Switch of both the DC and AC supply before working on the unit.
• Make sure that all work has been performed before switching on the power again.
This drawing illustrates where the thermostat is placed on the heater element:
Continued overleaf