Table of Contents
Advertisement
Preventive maintenance,
List,
continued
Interconnection
cable
Occupied
switch
DanCon test kit
DanLink
DanView
continued
Accessory
Illustration
Description
Interconnection cable, 10 m, with
two male SUB-D 25W connector
mounted for multiple units.
When a compressor-cooling
request is detected. It will be
signaled through the
interconnection cable, and one
randomly selected unit will start
active cooling.
Remote possibility to enable an
activation of the occupied mode,
which allows better comfort
conditions for personnel.
A pc can be connected to the
unit to achieve serial
communication.
The communication takes place
through an interface box
connected via a cable to the unit
RS 485 out.
DanLink is a telemonitoring
system designed for remote
surveillance and change of set
points.
The DanView is a display unit for
monitoring relevant parameters
in connection with the Dantherm
Air Handling standard shelter
cooling units.
Part no.
016394
015779
019203
Hardware:
AC:
012580
DC:
012581
Software:
017499
012958
37
Advertisement
Table of Contents
