Dantherm Silencio 600 Service Manual page 26

Mounting,
Procedure,
continued
26
continued
Step
2 Cut the slot and throw away the plate that has just been cut out
3 Drill the holes for the wall brackets
and mount them on the shelter
according to the measures on the
drawing above by using 4 bolts M8 ×
250 mm (enclosed)
4 Remove the two upper side covers
by unscrewing 4 screw on each cover
plate
5 Remove the top cover
unscrewing 4 screws
inside of the Silencio
Note:
A removal of all covers as well as all
3 fans is to be recommended. Please
see section "How to replace the
internal fan", page 42 and "How to
replace one of the external fans",
page 44 to see the procedures for
removal of the other covers and fans
Action
Wall bracket
by
from the
Continued overleaf