How To Replace The Heater Element - Dantherm Silencio 600 Service Manual

How to replace the heater element

Introduction
When to replace
Part number
Tools
Caution!
Illustration
54
The heater element keeps the internal temperature at an adequate level at low ambient
temperature.
The heater element only needs to be replaced when it is faulty.
The heater element can be ordered under part number 296083.
Make sure you have the following tools available before you start:
• Torx 25 screw driver
• 19 mm spanner
• Only trained and certified technicians are allowed to replace parts
• Switch of both the DC and AC supply before working on the unit
• Make sure that all work has been performed before switching on the power again
This drawing illustrates the heater element and where it is placed in the unit.
Continued overleaf