Table of Contents
Advertisement
Traction frame
Insert it into the Accessory attachment hole of the bed before use.
Insert the Traction frame into the Accessory attachment hole of the bed.
* For details, see the instruction manual for the Traction frame.
* Traction frame (KA-83U, KA-86U, PC-5121) is not designed for sales in Europe.
Also, it is not distributed in some regions as well where it is not registered as medical equipment. For
details on the sales of traction frame, contact Paramount Bed (see p. 118) or your distributor.
* This illustration uses the KA-83U model for
explanation.
Accessory attachment hole
WARNING
Orthopedic frame attachment
The orthopedic frame attachment can be used for attaching the orthopedic frame (KA-86U).
1 Insert the orthopedic frame attachment into the Accessory attachment hole on the foot side of the bed.
2 Insert a screwdriver into the orthopedic frame and tighten the screw.
3 Lightly pull up the orthopedic frame and check that it is attached firmly.
Head end
Accessory
attachment hole
Do not use the traction frame (KA-83U) with the extension frame drawn
out. The traction frame (KA-83U) cannot be properly attached to the bed,
and it may unexpectedly come off, resulting in injury, or the bed and the
object may be damaged or deformed.
Orthopedic frame attachment
Foot end
KA-83U, KA-86U*, PC-5121
* The KA-86U can be used by attaching the
CA-A343 (orthopedic frame attachment) to the bed.
82
Model No.
Model No.
CA-A343
Screw
Loosen
Tighten
Advertisement
Table of Contents
