Preparing The Bed; Attaching And Detaching The Headboard Or Footboard - PARAMOUNT BED 7B01001000A3 Operator's Manual

1 BEFORE USING THE BED

4. Preparing the bed

Attaching and detaching the headboard or footboard

The headboard and footboard can be attached and detached. When washing the patient's hair, detach the
headboard. When performing lower limb training or giving a foot bath, detach the footboard.
Board insertion part
Board stopper
Locked state
Board attachment hole
CAUTION
Unlocked state
n When attaching the headboard or footboard, make sure that the board
stoppers are locked. If they are not locked, the board may disengage
when the bed is moved, resulting in injury due to a fall.
n When detaching the headboard or footboard, do not forcefully lift up the
board while it is tilted. The board insertion part may be deformed.
<Attaching>
1.
Hold the grips of the headboard or footboard, lift
up the board, and insert the board insertion parts
into the board attachment holes securely until
they click into place.
2.
The board stoppers are automatically locked.
When attaching a board, insertion is pos-
sible regardless of whether the board
stoppers are set to the unlocked or
locked position.
<Detaching>
1.
Set the board stoppers to the unlocked position.
(2 locations)
2.
You can detach the headboard or footboard by
holding the grips of the headboard or footboard
and pulling it straight up.
29