Using The Patient Control Panel (Excluding Pa-H 612*, Pa-H 614*) - PARAMOUNT BED 7B01001000A3 Operator's Manual

Using the patient control panel (excluding PA-H 612*, PA-H 614*)

<Part names and functions>
The patient control panel is intended for patients to perform the following operations. It is located on the
inside of the left or right Head-end side-rail.
n Adjusting the angle of the head/knee sections
n Charging USB devices (on the right side only when the patient is lying down)
WARNING
4
1 Head up/down buttons ................. Adjust the angle of the head section.
2 Knee up/down buttons ................. Adjust the angle of the knee section.
3 Nurse call auxiliary button ........... Makes a nurse call.
4 USB port ...................................... Charges a smartphone or tablet.
n Do not apply excessive force to the patient control panel or touch it with
sharp objects. The patient control panel may be damaged, resulting in
electric shock or malfunction.
n Do not allow it to be operated by a person deemed incapable of
understanding the operation (a child aged 12 or under or a person with
dementia). If a person deemed incapable of understanding the operation
operates the patient control panel by oneself, a body part may get
caught in the bed by mistake, resulting in unexpected injury.
When such a person runs the risk of operating the patient control panel
by oneself, you can use one of the following procedures to limit operation
and decrease the chance of accident caused by incorrect operation.
• Set Overall lock-out on the side-rail integrated panel or BED Navi
(accessory) to disable the operation of the patient control panel. (For
the setting procedure, see p. 65 or the instruction manual for the
BED Navi (accessory).)
• Set Patient lock-out on the side-rail integrated panel or BED Navi
(accessory) to disable the operation of the patient control panel. (For
the setting procedure, see p. 65 or the instruction manual for the
BED Navi (accessory).)
• Disconnect the power plug and turn the battery off.
* PA-H 631*, PA-H 633* only (suitable product)
3
2
1
66