Endress+Hauser Dosimag Operating Instructions Manual page 40

Commissioning
Parameter overview with brief description
Parameter
Enter access code
9.4.2 Sensor adjustment
The Sensor adjustment submenu contains parameters that pertain to the functionality of the
sensor.
Navigation
"Setup" menu → Advanced setup → Sensor adjustm.
Sensor adjustment
Parameter overview with brief description
Parameter
Installation direction
9.4.3 Configuring the totalizer
In the "Totalizer 1 to 3" submenu the individual totalizers can be configured.
Navigation
"Setup" menu → Advanced setup → Totalizer 1 to 3
Totalizer 1 to 3
40
Description
Enter access code to disable
write protection of
parameters.
Installation direction
Description
Set sign of flow direction to
match the direction of the
arrow on the sensor.
Assign process variable
Volume unit
Totalizer operation mode
Failure mode
User entry
0 to 9 999
Selection
• 0 = Flow in arrow
direction
• 1 = Flow against arrow
direction
Dosimag
Factory setting
0
Factory setting
0 = Flow in arrow direction
Endress+Hauser