Endress+Hauser Dosimag Operating Instructions Manual page 32

Commissioning
Parameter overview with brief description
Parameter
Volume flow unit
Volume unit
9.3.3 Configuring the communication interface (option 4 and 5)
The "Communication" submenu guides you systematically through all the parameters that
have to be configured for selecting and setting the communication interface.
Navigation
"Setup" menu → Communication
Communication
32
Description
Select volume flow unit.
Result
The selected unit applies
for:
• Output
• Low flow cut off
• Simulation process
variable
Select volume unit.
Result
The selected unit is taken
from: Volume flow unit
parameter
Bus address
Baudrate
Data transfer mode
Parity
Byte order
Assign diagnostic behavior
Failure mode
Selection
Unit choose list
Unit choose list
Dosimag
Factory setting
Country-specific:
• 138 = l/h
• 16 = gal/min (us)
Country-specific:
• 41 = l
• 40 = gal (us)
Endress+Hauser