YASKAWA Varispeed G7 Series Instruction Manual page 77

PG-D2
The terminal specifications for the PG-D2 are given in the following table.
Terminal No.
1
2
3
4
TA1
5
6
7
8
TA2 (E)
* 5 VDC and 12 VDC cannot be used at the same time.
PG-X2
The terminal specifications for the PG-X2 are given in the following table.
Terminal No.
1
2
3
4
5
TA1
6
7
8
9
10
1
2
3
TA2 4
5
6
7
TA3 (E)
* 5 VDC and 12 VDC cannot be used at the same time.
Table 2.17 PG-D2 Terminal Specifications
Contents
Power supply for pulse generator
Pulse input + terminal
Pulse input - terminal
Common terminal
Pulse monitor output + terminal
Pulse monitor output - terminal
Shield connection terminal
Table 2.18 PG-X2 Terminal Specifications
Contents
Power supply for pulse generator
A-phase + input terminal
A-phase - input terminal
B-phase + input terminal
B-phase - input terminal
Z-phase + input terminal
Z-phase - input terminal
Common terminal
A-phase + output terminal
A-phase - output terminal
B-phase + output terminal
B-phase - output terminal
Z-phase + output terminal
Z-phase - output terminal
Control circuit common
Shield connection terminal
Installing and Wiring Option Boards
Specifications
12 VDC (±5%), 200 mA max.*
0 VDC (GND for power supply)
5 VDC (±5%), 200 mA max.*
Line driver input (RS-422 level input)
Maximum response frequency: 300 kHz
–
Line driver output (RS-422 level output)
–
Specifications
12 VDC (±5%), 200 mA max.*
0 VDC (GND for power supply)
5 VDC (±5%), 200 mA max.*
Line driver input (RS-422 level input)
Maximum response frequency: 300 kHz
0 VDC (GND for power supply)
Line driver output (RS-422 level output)
Control circuit GND
–
41
2-