YASKAWA Varispeed G7 Series Instruction Manual page 109

Set the autotuning type.
1 Turn ON the power supply.
Press the MENU Key several times to access the autotuning display.
2 The autotuning display will not appear during operation or when a fault
has occurred.
Press the DATA/ENTER Key to display the T1-01 (Autotuning Mode
3
Selection) user constant setting.
4 Press the DATA/ENTER Key to display the current set value of T1-01.
5 Press the Increment Key and set the value to 0 (rotational autotuning).
6 Press the DATA/ENTER Key to confirm the value.
Step
Trial Operation Procedures
Digital Operator Display
Initial display
Display when the setting has been confirmed
Display after the setting has been confirmed
11
4-