On Consignment Of The Machine; Intended Use; Introductory Comment; Serial Number Plate - Ice MTECH 70 D Use And Maintenance Manual

On consignment of the machine

When the machine is consigned to the customer, an immediate check
must be performed to ensure all the material mentioned in the shipping
documents has been received, and also to check the machine has not
suffered damage during transportation. If this is the case, the carrier must
ascertain the extent of the damage at once, informing our customer
service office. It is only by prompt action of this type that the missing
material can be obtained, and compensation for damage successfully
claimed.

Introductory comment

The MTECH 70 D is a floor scrubbing machine which, by means of the
mechanical action of the rotating brush and the chemical action of a
water/detergent solution, can clean any type of flooring. As it advances, it
also collects any removed dirt as well as the detergent solution not
absorbed by the floor.
The machine must only be used for this purpose. Even the best
machines will only work well if used correctly and kept in good working
order. We therefore suggest you read this instruction booklet carefully
and read it again whenever difficulties arise while using the machine. If
necessary, remember that our customer assistance service (organised in
collaboration with our dealers) is always available for advice or direct
intervention.
TECHNICAL DESCRIPTION
Working width
Squeegee width
Working capacity, up to
Disc brush
Disc brush rotations
Brush motor
Maximum pressure on the brush
Traction motor
Traction wheel (number / diameter / width)
Maximum forward speed in transport mode
Maximum forward speed in working mode
Maximum gradient with full load
Vacuum motor
Suction vacuum
Rear wheel (number / diameter / width)
Solution tank
Recovery tank
Steering diameter
Machine length
Machine length (with splash guard kit)
Machine height
Machine width (without squeegee)
Machine width (without squeegee + optional splash guard kit)
Battery compartment (l x w x h)
Rated battery voltage
Battery weight (calculated with 12 V 77Ah battery)
Machine weight (machine + brush + squeegee)
Machine weight in transport (machine + batteries + brush + squeegee)
Machine weight in running order (machine + batteries + water + brush + squeegee)
Sound pressure level (ISO 11201) - L
Uncertainty K
pA
Hand vibration level (ISO 5349)
Uncertainty of measurement of vibrations
pA

Intended use

The floor scrubbing machine is designed exclusively for the professional
cleaning of surfaces and floors in industrial, commercial and public
environments. The machine is only suitable for use in closed - or at least
covered - locations.
The machine is not suitable for use in the rain, or under water jets. It is
FORBIDDEN to use the machine for picking up dangerous dusts or
inflammable liquids within places with a potentially explosive atmosphere.
In addition, it is not suitable as a means of transport for people or objects.

Serial number plate

UM iMx 50B
mm 508
mm 705
m /h 2032
2
1 / 508
No. / Ø mm
rpm 166
V/W 24 / 500
kg 25
V/W -
No. / ( mm / mm) 2 / (225 / 64)
km/h -
km/h -
% 2
No./(V/W) 1 / (24 / 310)
mmH O 610
2
 mm / mm 1 / 80 / 23
l 41
l 37
mm 850
mm 1180
mm 1200
mm 1030
mm 570
mm 580
mm 353 / 333 / 250
Nr / V / Ah 2 / 12 / 77
kg 26.5
kg 69
kg 122
kg 163
dB (A) 52.9
dB (A) 1.5
m/s 0.663
2
6%
7
MTECH 70 D iMx 50BB
508 508
705 705
2032 2032
1 / 508 1 / 508
166 166
24 / 500 24 / 500
25 25
24 / 150 -
2 / (225 / 64) 2 / (172.5 / 45)
4 -
3.9 -
2 2
1 / (24 / 310) 1 / (24 / 310)
610 610
1 / 80 / 23 1 / 80 / 23
41 41
37 37
850 850
1180 1180
1200 1200
1030 1030
570 570
580 580
353 / 333 / 250 353 / 333 / 250
2 / 12 / 77 2 / 12 / 77
26.5 26.5
76 69
129 122
170 163
63 52.9
1.5 1.5
0.612 0.663
6% 6%