Table of Contents
Advertisement
1. Switch off the power supply to the machine's electrical system using the main switch (01) located on
the rear of the machine, turning the key to position "0" (valid for versions B-BT).
2. Make sure the recovery tank is empty, otherwise empty it completely.
3. Disconnect the electrical connector (02) from the battery connector.
4. Engage the parking brake by means of the lever (03) on the right side of the machine (only for BT
versions).
5. Remove the squeegee body vacuum hose (04) from the hole in the recovery tank.
WARNING: This operation must be carried out using gloves to protect against
contact with dangerous solutions.
6. Disconnect the vacuum motor hose (05) from the squeegee nozzle on the recovery tank.
7. Remove the recovery tank drainage hose (06) from the support and lay on the ground.
8. Remove the vacuum cover (07) and position on the support (08) designed for this purpose, positioned
at the rear of the machine.
WARNING: To use the support (08), simply turn the tongue outwards, and once the
support function is complete, the tongue can be turned back inwards.
WEEKLY MAINTENANCE
43
Advertisement
Table of Contents
