Table of Contents
Advertisement
Figure (6, 7)
The accessories can be inserted in 2 different ways: directly at the end of the flexible tube (Mode 1) or at the end of the
motor block (Mode 2).
Mode 1: Take the long nozzle attachment, insert it into the end of the aluminium tube until you hear a click that
confirms installation. To remove it, pull directly on it.
Take the 2 in 1 brush accessory and do the same manipulation: insert it into the end of the aluminium tube until you
hear a click that confirms installation.
To remove it, pull directly on it. (Figure 6 and 7)
Mode 2: To insert the accessories directly to the engine block, repeat the operation (Figure 8 and 9).
Figure 8
Figure 9
Battery installation instructions
Install the battery into the machine in the direction of (Fig.10) and install it as (Fig.11) to ensure no loosening. If the
sound is heard, it has been installed successfully.
Figure 10
Figure 11
ATTENTION:
For long term use, keep the battery in a cool and dry place, and leave the battery in a semi-charged state. Please wrap
the battery with non-conductive material to avoid direct contact with the battery which may cause damage to the
battery.
8
Advertisement
Table of Contents
