Answering Calls; Hanging Up; Cordless Handset Leds - Mitel MiVOICE OFFICE 250 User Manual

Mitel 5320e/5330e/5340e User Guide

Answering Calls

The following instructions describe how to answer a call.
To answer a call:
Do one of the following:
• Lift the cordless handset.
• If the handset is already out of the cradle, press the hookswitch button on the handset.

Hanging Up

If you are out of range for more than 10 seconds, any call that is in progress is dropped and
not recovered.
To hang up:
Do one of the following:
• Replace the cordless handset in the cradle.
• Press the hookswitch button on the handset.

Cordless Handset LEDs

The handset has two LEDs:
• Blue – indicates the operational status of the handset.
• Green – indicates the status of the electrical charge of the battery.
The handset is blinking, when the LED is on and off for an equal amount of time. The handset
is winking, when the LED is on for a short period of time and off for a longer period of time.
LED Color
Blue
Green
104
LED State
Solid Handset is muted.
Blinking Handset is in pairing mode.
Winking Active audio path between handset and module.
Off No audio path between handset and module.
Battery is dead.
Solid Battery is fully charged.
Blinking Battery is charging.
Off When handset is cradled and the LED does not flash or illuminate,
this indicates an absence of battery power. During the first
30 – 60 minutes that the light is off, the battery may be trickle
charging. If that is the case, the LED resumes normal behavior
within that 60–minute period. If the LED remains off for more than
60 minutes, then either the battery is no longer chargeable or there
is a problem in the charging circuit.
Indicates: