Dialing From Your Contact List; Specifying Audio Feedback Options - Mitel MiVOICE OFFICE 250 User Manual

Mitel 5320e/5330e/5340e User Guide

Dialing from Your Contact List

You can dial a phone number associated with a contact name in your People application list.
To dial a contact from your People application list on your 5340e IP Phone:
1. From the idle display, press
2. Use the navigation buttons to page through the contact list and select the desired name.
3. Dial the contact name using one of the following methods:
• Select a contact name and press Dial.
• Press the button to the right of the contact's dial icon in the main list. (The contact name
does not need to be selected.)
4. Continue the call using the speakerphone, or lift the handset for privacy.

Specifying Audio Feedback Options

The Audio Feedback setting allows you to adjust the volume of the audio feedback as well as
the error beeps, and enable or disable the setting.
The error beep volume in the phone is related to the volume of the speaker. You can set the
beep volume using this procedure; however, adjusting the speaker volume also affects the
beep volume.
To adjust the volume of the audio feedback:
1. Press (Applications).
2. Press Settings, and then press Audio Feedback.
3. Set the audio feedback options for the button beep and error beep.
• To turn audio feedback on or off, press
• To adjust the volume level, press
• To play the beep, press Play button beep or Play error beep.
4. Press Save.
5. Press Close to exit the Applications menu.
30
(Applications), and then press People.
or .
or .