Low Battery Level; Cordless Handset; Cordless Handset Features - Mitel MiVOICE OFFICE 250 User Manual

Low Battery Level

When the battery of a cordless device reaches a near-critical level, the IP phone displays a
warning. Until the battery is recharged (or until it becomes fully discharged), the warning is
repeated at each new call. To continue with a call while charging the cordless device, switch
to speakerphone and then cradle the cordless device.

Cordless Handset

The cordless handset, shown below provides office mobility, allowing you to place and answer
calls while away from your desk. Replacing the standard corded handset, the cordless handset
contains a chargeable battery that charges in the handset cradle when not in use. To use the
cordless handset, you must pair the handset with the IP phone. For more information, see
"Pairing the Cordless Module and Accessories" on "Pairing the Cordless Module and Devices"
on page 101.

Cordless Handset Features

Cordless handset elements are shown in the following table.
Feature
1 – Cordless Handset LED
2 – Hookswitch and pairing button
3 – Mute button
4 – Volume Up and Down button
Blue: LED indicating the status of the handset.
Green: LED indicating the status of the handset battery.
For more information see
Lifting the handset from the cradle activates the handset. If the
handset is already out of the cradle, pressing the hookswitch
takes the handset off-hook. Pressing the hookswitch again
returns it to on-hook.
Pressing the hookswitch while on a speakerphone all, moves the
call to the cordless handset.
Mute allows you to turn the microphone off during a call.
Up and Down buttons provide volume control for the ringer and
handset/headset.
Cordless Devices
Function
page 104
.
103