Safety - THORLABS vytran PTR406 User Manual

Fiber Recoaters with Linear Proof Testers

Safety

All statements regarding safety of operation and technical data in this instruction manual will only apply when the
unit is operated correctly.
Unplug the power cord before servicing the unit. Do not operate the unit without all covers and
!
Before connecting the AC power cord, make sure the source voltage is between 85 and 265 VAC,
47-63 Hz. Input voltages outside these ranges may result in damage to the unit.
!
The recoat material is a flammable, toxic, acrylate compound. Avoid contact with the skin and eyes.
!
Argon is a chemically inert gas. It is colorless, odorless, tasteless, non-flammable, non-corrosive
and non-toxic. However, the work area should be well ventilated to ensure that the correct oxygen
!
Ensure that the operator is properly trained for the handling of compressed gases and regulators.
Small transparent fiber shards may be present in and around the work area, and as such, the
necessary measures should be taken to ensure the safety of the employee(s).
!
This unit must not be operated in explosive environments. The equipment should be used in a
standard laboratory environment with temperature and humidity control.
!
All materials (such as wipes and gloves) that have acrylate material on them should be disposed
Fuses can be replaced by twisting it to release and then pulling it out of the housing; it is replaced by pushing the
fuse into the housing and then twisting it to lock in place. The fuse is 6.4 A, 250 V.
Page 2
SHOCK WARNING
items properly installed.
CAUTION
CAUTION
WARNING
level is maintained.
WARNING
WARNING
WARNING
with solid chemical waste.
Chapter 2: Safety
!
!
!
!
!
!
TTN176280-D02