1.2 Ordering Codes and Accessories 1.3 Requirements 2 Getting Started 2.1 Parts List 2.2 Installing Software 2.3 First Steps 3 Appendix 3.1 Certifications and Compliances 3.2 Warranty 3.3 Copyright and Exclusion of Reliability 3.4 Thorlabs 'End of Life' Policy 3.5 Thorlabs Worldwide Contacts...
Each measurement sensor is calibrated at different wavelength points. These base points are interpolated. The PAX1000 is basically powered via the USB port. For a measurement speed higher that 50 samples per second, an additional power supply is required - please connect the DS15 power supply to your mains outlet and to the PAX1000.
Page 6
PAX1000 equipment other than those specified by Thorlabs GmbH. The correction of interference caused by such unauthorized modification, substitution or attachment will be the re- sponsibility of the user. The use of shielded I/O cables is required when connecting this equipment to any and all optional peripheral or host devices.
® · Windows 8.1 (32-bit, 64-bit) ® · Windows 10 (32-bit, 64-bit) For operation of the PAX1000, the following software is required as well: ® · NI-VISA Runtime (Version 5.4 or later) ® · Microsoft .Net (Version 4.6.1 or later) ®...
If the shipping container seems to be damaged, keep it until you have inspected the contents and you have inspected the PAX1000 mechanically and electrically. Verify that you have received the following items within the package, depending on the ordered item: 1.
The PAX1000 software package contains beside the PAX1000 software a NI VISA Runtime and the Thorlabs DFU Wizard. The latter is required to enable the user to install future firmware updates to the PAX1000. The software package can be downloaded from the website https://www.thorlabs.com/software_pages/ViewSoftwarePage.cfm?Code=PAX1000x...
Please take into account an initial warm up time of the PAX1000xxx. Note The supplied USB cable is certified for use with the PAX1000. The use of other and / or longer cables may lead to degradation of performance, data loss or even malfunction of the PAX1000.
For warranty repairs or service the unit must be sent back to Thorlabs GmbH. The customer will carry the shipping costs to Thorlabs GmbH, in case of warranty repairs Thorlabs GmbH will carry the shipping costs back to the customer.
Waste treatment on your own responsibility If you do not return an “end of life” unit to Thorlabs GmbH, you must hand it to a company spe- cialized in waste recovery. Do not dispose of the unit in a litter bin or at a public waste disposal site.
Email: europe@thorlabs.com Email: scandinavia@thorlabs.com France Brazil Thorlabs SAS Thorlabs Vendas de Fotônicos Ltda. 109, rue des Côtes Rua Riachuelo, 171 78600 Maisons-Laffitte São Carlos, SP 13560-110 France Brazil Tel: +33-970 444 844 Tel: +55-16-3413 7062 Fax: +33-825 744 800 Fax: +55-16-3413 7064 www.thorlabs.com...
Need help?
Do you have a question about the PAX1000 and is the answer not in the manual?
Questions and answers