3.3 Connecting multiple fixed LNBs using a DiSEqC switch
a. Connect the LNBs of your fixed antenna to the inputs of a DiSEqC switch
b. Connect the output or "to receiver" connector of the DiSEqC switch to the SAT IN connector on your
receiver.
c. Refer to section 3.1 or 3.2 for TV and mains connections.
3.4 Connecting to digital audio amplifier
Connect one end of a good quality coaxial audio cable to the S/PDIF output of your receiver and the other
end to the coaxial audio input of your home theatre, amplifier or any other device supporting digital audio.
7040
7040
12
Fig. 8
Fig. 8