Strong SRT 7040 Manual page 27

OSD Transparency
Favourite
Here you can rename the default names of the Favourite lists. For example: Movies or Music. Or even the
names of users of the unit with their own dedicated channels. Select the list name you want to edit and
press OK. Use the pop-up keyboard to change the name and select BLUE (OK) to confirm.
Audio Description setting
AD. For the visually impaired, a narrator can describe the actions happening on screen with a dedicated
additional audio track, mixed with the original audio track. This service is provided by some broadcasters
and is therefore subject to availability.
AD Service
Use AD as default
AD Volume Offset
Auto Standby
Tools
This menu provides some technical options for the working of the unit.
Information
Factory Setting
Reset your receiver to the default factory settings.
Enter your password or the default password 0000, select Yes and press OK to confirm.
The receiver will reboot and start with the First Installation menu.
WARNING: A factory reset will permanently delete all your personal settings, timers and stored channels.
Please consider this before you perform a factory reset.
Upgrade by USB
Download the required update file for your receiver model from the support page on our website www.
strong.tv or contact your local dealer.
Unzip the file on your computer, if necessary, and copy it to root folder of your USB storage device. The USB
device must have been formatted in FAT32 on a PC.
Connect the USB storage device to the USB port of the receiver. Press MENU and select Tools, then Upgrade
By USB to update the software select at Upgrade Mode the option Allcode. At Upgrade File select the correct
upgrade file, the file has the extension abs.
Then select Start, and press OK to initiate the upgrade process. An attention banner will now be displayed.
Press OK to confirm Yes the update (or No to cancel it). The update process will take some time. After the
update process has been completed the receiver will restart and then show the first channel in the TV list.
You can now safely remove the USB device, and then remove the update software from the device (at the
PC), to prevent accidental updating again.
Set the amount of transparency the OSD (banners and menu) will have,
superimposed on the running program. 40% is the most transparent option.
Select On if you wish to use the service by default on all channels which may
carry an AD track.
Select On if you wish to use the service by default on all channels which may
carry an AD track.
Set the balance of volume the AD audio track will have, mixed with the original
audio track.
This feature is implemented for power saving. The receiver will turn to Standby
automatically if no command from the remote is received for the selected time
period. Default is 3 hours. It can also be turned Off.NOTE: If there are timers
running, the auto standby function will be disabled for the booked time.
Read the technical details of your receiver, like model number, Software/
Hardware version and serial number. This information could be asked during a
service call or repair request.
27