19 STORAGE
19.2
116
Putting into operation after storage
401059-01
Info
Do not use non-porous materials since they prevent humid-
ity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since the
engine cannot warm up properly, the water vapor produced
during combustion condenses and causes valves and the
exhaust system to rust.
–
Install the 12-V battery.
(
–
Remove the motorcycle from the lift stand. (
–
Perform checks and maintenance measures when preparing for use.
(
p. 25)
–
Take a test ride.
p. 94)
p. 44)