Installing The Shock Absorber - GAS GAS MC 250F 2021 Owner's Manual

11.19

Installing the shock absorber

–
Hold the shock absorber and remove screw
–
Remove the shock absorber carefully at the bottom.
A00814-10
Main work
–
Carefully position the shock absorber into the vehicle from the bot-
tom.
–
Mount and tighten screw
Guideline
Screw, top shock
absorber
A00815-10
–
Position the link fork and mount the swingarm pivot.
Info
Pay attention to flat area
–
Mount and tighten nut
Guideline
Nut, fork pivot
A00816-10
–
Mount the chain.
–
Connect the chain with connecting link
Guideline
The closed side of the chain joint lock must face in the direction
of travel.
A00812-10
–
Position the foot brake cylinder.
4
Push rod
Info
Ensure that the dust boot is correctly seated.
–
Mount and tighten screws
Guideline
Remaining screws,
A00817-10
chassis
SERVICE WORK ON THE CHASSIS 11
6
1
.
M10 60 Nm (44.3 lbf ft)
A
.
2
.
M16x1.5 100 Nm (73.8 lbf ft)
3
.
engages in the foot brake cylinder.
5
.
M6 10 Nm (7.4 lbf ft)
.
Loctite ® 2701™
55