–
Insert the new brake linings, insert pin
3
pins
.
Info
Always change the brake linings in pairs.
Make sure that decoupling plate
ton side brake lining.
–
Operate the foot brake lever repeatedly until the brake linings are in
contact with the brake disc and there is a pressure point.
A00838-10
–
Correct brake fluid level to marking
Brake fluid DOT 4 / DOT 5.1 (
–
Mount and tighten screw cap
ring.
Info
Use water to immediately clean up any brake fluid that has
overflowed or spilled.
A00833-10
BRAKE SYSTEM 12
4
, and mount cotter
7
is mounted on the pis-
A
.
p. 130)
1
2
with membrane
and the O-
87