Table of Contents
Advertisement
Information only; no action is required
• FQXSPPU0008I: [ProcessorElementName] has been Disabled.
This message is for the use case when an implementation has detected a Processor has been Disabled.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0061
User Action:
Information only; no action is required
• FQXSPPU0009N: [ProcessorElementName] has a Configuration Mismatch.
This message is for the use case when an implementation has detected a Processor Configuration
Mismatch has occurred.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - CPU
SNMP Trap ID: 40
CIM Prefix: PLAT CIM ID: 0062
User Action:
Information only; no action is required
• FQXSPPU0010I: A terminator has been detected on [ProcessorElementName].
This message is for the use case when an implementation has detected a Processor Terminator.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - CPU
SNMP Trap ID: 42
CIM Prefix: PLAT CIM ID: 0064
User Action:
Information only; no action is required.
• FQXSPPU0012M: [ProcessorElementName] has machine check error.
This message is for the use case when an implementation has detected a Processor that has encountered
a machine check error.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - CPU
SNMP Trap ID: 40
CIM Prefix: PLAT CIM ID: 0058
User Action:
Make sure power cables are connected correctly.
.
Chapter 2
XClarity Controller events
93
Advertisement
Table of Contents
