Table of Contents
Advertisement
Table 2. Events organized by severity (continued)
Message String
Event ID
FQXSPPU0003N
[ProcessorElementName] has Failed with IERR.
FQXSPPU0004M
[ProcessorElementName] has Failed with FRB1/BIST condition.
FQXSPPU0005M
[ProcessorElementName] has Failed with FRB2/POST condition.
FQXSPPU0006M
[ProcessorElementName] has Failed.
FQXSPPU0009N
[ProcessorElementName] has a Configuration Mismatch.
FQXSPPU0012M
[ProcessorElementName] has machine check error.
FQXSPPW0002L
[PowerSupplyElementName] has Failed.
FQXSPPW0003L
Power supply [arg1] in the enclosure/chassis (MTM-SN: [arg2])has
failed.
FQXSPPW0007L
[PowerSupplyElementName] has a Configuration Mismatch.
FQXSPPW0012L
Soft power control has failed for [PowerSupplyElementName].
FQXSPPW0013L
[PowerSupplyElementName] has Failed.
FQXSPPW0061M
Sensor [SensorElementName] has transitioned to critical from a less
severe state.
FQXSPPW0110M
Non-redundant:Insufficient Resources for
[RedundancySetElementName] has asserted.
FQXSPSD0001L
The [StorageVolumeElementName] has a fault.
FQXSPSD0002L
Drive [arg1] in the enclosure/chassis(MTM-SN: [arg2]) has a fault.
FQXSPSD0005L
Array [ComputerSystemElementName] is in critical condition.
FQXSPSD0006L
Array [ComputerSystemElementName] has failed.
FQXSPSD0007L
Array critical asserted on drive [arg1] in the enclosure/chassis (MTM-
S/N: [arg2]).
FQXSPSD0008K
Rebuild Aborted for array [ComputerSystemElementName].
FQXSPSD0008L
Array failed on drive [arg1] in the enclosure/chassis (MTM-S/N: [arg2]).
FQXSPSE4000I
Certificate Authority [arg1] has detected a [arg2] Certificate Error.
FQXSPSE4006I
XCC detected an invalid SSL certificate in the Management Controller
[arg1] .
FQXSPUP4000I
Please ensure that the Management Controller [arg1] is flashed with
the correct firmware. The Management Controller is unable to match
its firmware to the server.
FQXSPUP4003I
[arg1] firmware mismatch internal to system [arg2]. Please attempt to
flash the [arg3] firmware.
FQXSPUP4004I
XCC firmware mismatch between nodes/servers [arg1] and [arg2].
Please attempt to flash the XCC firmware to the same level on all
nodes/servers.
FQXSPUP4005I
FPGA firmware mismatch between nodes/servers [arg1] and [arg2].
Please attempt to flash the FPGA firmware to the same level on all
nodes/servers.
Severity
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
Error
.
Chapter 2
XClarity Controller events
25
Advertisement
Table of Contents
