Lenovo 7D7A Manual page 40

Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0212
User Action:
Information only; no action is required
• FQXSPEM0008N: The System [ComputerSystemElementName] has encountered a system
hardware fault.
This message is for the use case when an implementation has detected an Unknown System Hardware
Failure.
Severity: Error
Serviceable: Yes
Automatically notify Support: Yes
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0214
User Action:
Information only; no action is required
• FQXSPEM2008I: The System [ComputerSystemElementName] has recovered from a system
hardware fault.
This message is for the use case when an implementation has recovered from an Unknown System
Hardware Failure.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Other
SNMP Trap ID: 50
CIM Prefix: PLAT CIM ID: 0215
User Action:
Information only; no action is required.
• FQXSPEM4000I: The [arg1] on system [arg2] cleared by user [arg3].
This message is for the use case where a Management Controller Event Log on a system is cleared by a
user.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: none
SNMP Trap ID:
CIM Prefix: IMM CIM ID: 0020
User Action:
Information only; no action is required.
• FQXSPEM4001I: The [arg1] on system [arg2] is 75% full.
36
ThinkSystem ST650 V3 Messages and Codes Reference