Lenovo 7D7A Manual page 197

2. Reboot the system.
3. Check and reverse any recent changes to system settings or the Operating System.
4. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFPU0038I: A correctable error (Type [arg1]) has been detected by processor [arg2].
Severity: Info
User Action:
Complete the following steps:
1. A correctable error detected by CPU. No action is needed.
2. Below list provides the description for error type:
a. "1" indicate PIE(Power Management, Interrupts, Etc.) error.
b. "2" indicate NBIO(Northbridge IO) error.
c. "3" indicate SMU(System Management Unit) error.
d. "4" indicate PSP(Platform Security Processor) error.
e. "5" indicate MP5(Microprocessor5 Management Controller) error.
• FQXSFPU0062F: System uncorrected recoverable error happened in Processor [arg1] Core [arg2]
MC bank [arg3] with MC Status [arg4], MC Address [arg5], and MC Misc [arg6].
Severity: Warning
User Action:
Complete the following steps:
1. Perform a virtual reseat or AC cycle the server.
2. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFPU0063N: CPU [arg1] cores [arg2] disabled.
Severity: Error
User Action:
Complete the following steps:
1. Update UEFI firmware to the latest version.
2. Power off the system and remove the A/C power.
3. Restore the A/C power and power on the system.
4. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFPU4033F: TPM Firmware recovery is in progress. Please DO NOT power off or reset system.
Severity: Warning
User Action:
Information only; no action is required.
Note: The system will not respond to power off signal (FQXSFPU4034I) while TPM firmware recovery in
progress.
• FQXSFPU4034I: TPM Firmware recovery is finished, rebooting system to take effect.
Severity: Info
User Action:
. 193
Chapter 3 UEFI events