Lenovo 7D7A Manual page 180

3. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFMA0038K: All Intel Optane PMEMs could not be auto unlocked because of no passphrase.
Severity: Warning
User Action:
Complete the following steps:
1. Provision the passphrase for Intel Optane PMEM auto unlock or unlock PMEMs in OS with Intel
PMEM tools.
2. Methods to provision the passphrase:
a. Option 1. enable security on all Intel Optane PMEMs found through System Setup with Scope of
"Platform" under the (System Settings > Intel Optane PMEMs > Security).
b. Option 2. enable security on all Intel Optane PMEMs found through OneCLI command (OneCLI.
exe config set IntelOptanePMEM.SecurityOperation "Enable Security") and (OneCLI.exe config
set IntelOptanePMEM.SecurityPassphrase "the user passphrase").
Note: if the security state is mixed, then disable security for those PMEMs in System Setup by
selecting the scope of "Single PMEM" under the (System Settings > Intel Optane PMEMs >
Security) firstly before take the action to provision the passphrase. If PMEMs are not unlocked,
system will not see or access the persistent region of PMEMs.
• FQXSFMA0039K: One or more Intel Optane PMEMs could not be auto unlocked because of invalid
passphrase.
Severity: Warning
User Action:
Complete the following steps:
1. Use OneCLI to check which PMEM is failed for unlock. Using different passphrases could caused
auto unlock failure.
2. Use UEFI setup page or Intel PMEM OS tool to unlock the related PMEM with right passphrase.
3. in order to avoid this auto unlock failure in next boot, change the passphrase of these PMEMs in
System Setup utility with the scope of "Single PMEM" under the (System Settings > Intel Optane
PMEMs > Security).
Note: If PMEMs are not unlocked, system will not see or access the persistent region of PMEMs.
4. If the issue is not resolved then contact Lenovo Support.
• FQXSFMA0040K: Invalid Intel Optane PMEM configuration detected. Please verify PMEM
configuration is valid.
Severity: Warning
User Action:
Complete the following steps:
1. Check system spec and follow the rules for populating PMEM in correct order.
2. If the problem persists, collect Service Data logs and contact Lenovo Support.
• FQXSFMA0041K: Near Memory/Far Memory ratio (1:[arg1].[arg2]) for Intel Optane PMEM
configuration is not in recommended range (1:[arg3] - 1:[arg4]).
Severity: Warning
User Action:
176
ThinkSystem ST650 V3 Messages and Codes Reference