Table of Contents
Advertisement
User Action:
Information only; no action is required
• FQXSPPW0009I: [PowerSupplyElementName] has been Power Cycled.
This message is for the use case when an implementation has detected a Power Unit that has been power
cycled.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0108
User Action:
Replace hard disk drive at the next maintenance period.
• FQXSPPW0010I: [PowerSupplyElementName] has encountered an error during power down.
This message is for the use case when an implementation has detected a Power Unit that encountered a
power down error.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0110
User Action:
Information only; no action is required
• FQXSPPW0011I: [PowerSupplyElementName] has lost power.
This message is for the use case when an implementation has detected a Power Unit that has lost power.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0112
User Action:
Information only; no action is required
• FQXSPPW0012L: Soft power control has failed for [PowerSupplyElementName].
This message is for the use case when an implementation has detected a Power Unit that has
encountered a failure when trying soft power control.
Severity: Error
Serviceable: Yes
Automatically notify Support: No
Alert Category: Critical - Power
SNMP Trap ID: 4
CIM Prefix: PLAT CIM ID: 0114
100
ThinkSystem ST650 V3 Messages and Codes Reference
Advertisement
Table of Contents
