Table of Contents
Advertisement
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Memory
SNMP Trap ID: 41
CIM Prefix: PLAT CIM ID: 0127
User Action:
Information only; no action is required
• FQXSPMA2003I: [PhysicalMemoryElementName] Removed on Subsystem [MemoryElementName].
This message is for the use case when an implementation has detected Memory has been Removed.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0129
User Action:
Information only; no action is required
• FQXSPMA2004I: [PhysicalMemoryElementName] Enabled on Subsystem [MemoryElementName].
This message is for the use case when an implementation has detected that Memory has been Enabled.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID:
CIM Prefix: PLAT CIM ID: 0130
User Action:
Information only; no action is required
• FQXSPMA2005I: The System [ComputerSystemElementName] has detected a POST Error
deassertion.
This message is for the use case when an implementation has detected that Post Error has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Critical - Memory
SNMP Trap ID: 41
CIM Prefix: PLAT CIM ID: 0185
User Action:
Information only; no action is required.
• FQXSPMA2006I: Parity Error Recovery for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName].
This message is for the use case when an implementation has recovered from a Memory parity error.
Severity: Info
58
ThinkSystem ST650 V3 Messages and Codes Reference
Advertisement
Table of Contents
