Disc Output Configuration - Rimage Professional Endeavor User Manual

Disc Output Configuration

The Endeavor autoloader has five output trays numbered 1 through 5. Production
Server software handles these trays in various ways depending on the settings.
The Transporter Configuration tab in the Parameters dialog has a Mailbox combo-box
with three options for the Endeavor outputs: "Output", "Res. Output", and "Don't
Use". Refer to the Production Server online Helps for more information.
When the Mailbox parameter is set to "Output", the Production Server places
completed discs in the first available tray, until all of the trays have a single disc.
After that, completed discs are placed in the output bin, until one or more of the trays
are emptied.
When the Mailbox parameter is set to "Res. Output" (reserved output), the Production
Server places discs in the trays only if the order specifies it. The order may specify a
tray number (0 – 5) or 'X' ('ANY' in the messaging architecture). If the order specifies
a tray number of '0', or doesn't specify, the completed disc will be placed in the Output
Bin. If the order specifies a tray number of 1 – 5, then one disc can be placed in each
tray. After each tray has a disc, the operator is prompted to remove the discs from the
specified tray so more can be placed in that tray. If the order specifies tray 'X', then
the completed disc is placed in the first empty tray and the order is updated with the
tray number where the disc was placed. An order that specifies tray 'X' can only be set
for 1 copy, since there is no way to report back multiple tray numbers in the order.
Any order that specifies tray 1 – 5, or 'X', must also set the 'target server' and 'target
line' fields in the order.
When the Mailbox parameter is set to "Don't Use", no discs will be placed in the
output trays.
11