Output Trays; Output Bin - Rimage Professional Endeavor User Manual

Rimage professional endeavor: user guide

Hide thumbs Also See for Professional Endeavor:

Table of Contents

Output Trays

There are five output trays on the outside of the Endeavor. When a disc is recorded

and printed, the lift arm moves to a tray position and releases the disc. The disc slides

down and out to the end of the tray. There are sensors located on each output tray to

detect if a disc is in the tray. See

how discs are distributed to the output trays and output bin. The output trays are

numbered 1 through 5, with #1 located at the top.

The output bin receives finished and/or failed discs. The output bin handles up to 75

discs. To remove discs from the output bin, hold the output bin with one hand while

moving the Bin Latch up and lower the bin down. This provides easy access to the

output bin to remove the discs.

Lift the Output Bin with one hand and then pull the bin latch down to lock it in place.

Do not use the latch to lift the output bin!

Disc Output

Configuration" on page

Output Trays

Bin Latch

to understand

Output Bin

Table of Contents

Endeavor