Rimage Producer 8100 Supplementary Manual

Producer III/Producer IIIN Maintenance Schedule

Maintain the Producer III Autoloader

This section provides information about preventative maintenance and how to align the printer.
Warning! Always power off the autoloader and unplug the power cord before you access the embedded PC.
Overview
Regular preventative maintenance of your Producer III can help to ensure error-free recordings and clean printed
labels. Maintenance involves cleaning the system and aligning the printer on top of the autoloader.
Note: The printer has its own maintenance requirements. Refer to your printer's User Guide for information.

Cautionary Information

Caution: To avoid damaging the Producer III during maintenance:
•
Never use oils, silicone, or other lubricants on any part of the Producer III.
•
Use only non-abrasive cleaners to wipe down the surfaces of your Producer III.
•
Never use cleaners to clean the embedded PC.
•
Avoid pouring cleaners directly onto the Producer III. Instead, apply the cleaner to the cloth first.
•
Observe precautions for electrostatic-sensitive devices whenever you access the embedded PC.
2000538_B 1