Rimage Professional Endeavor User Manual page 30

Rimage professional endeavor: user guide

Hide thumbs Also See for Professional Endeavor:

Table of Contents

EVEREST PRINTER RAISE P.H. ERR. – Send the Everest Printer to the factory

for service.

EVEREST PRINTER RETRANSFER OUT – The retransfer ribbon is at the end of

the roll and a retransfer ribbon must be installed.

EVEREST PRINTER RETRANSFER GONE – The retransfer ribbon is not

installed and a retransfer ribbon must be installed.

EVEREST PRINTER RIBBON OUT – The print ribbon is out and a print ribbon

must be installed.

EVEREST PRINTER R.T. DOWN SENSOR – Send the Everest Printer to the

factory for service.

EVEREST PRINTER R.T. UP SENSOR – Send the Everest Printer to the factory

for service.

EVEREST PRINTER R.T. ROLLER FAIL – Send the Everest Printer to the

factory for service.

EVEREST PRINTER R.T. MOTOR FAIL – Send the Everest Printer to the factory

for service.

EVEREST PRINTER R.T. THERMISTOR – The retransfer roller thermister is

bad and must be replaced. Send the Everest Printer to the factory for service.

EVEREST PRINTER SET SWITCH TO 1 – Endeavor detected the mode switch on

the Everest Printer is not set to position 1. Change the switch to position 1 and recycle

the power on the Endeavor.

EVEREST PRINTER P.H. THERMISTOR – The printhead thermister is bad and

must be replaced. Send the Everest Printer to the factory for service.

Table of Contents

Endeavor