System Switches - Rimage Professional Endeavor User Manual

System Switches

Power Switch
The Power Switch is located on the back corner of the Endeavor. The power switch
controls the power for the Endeavor, which then supplies power to the Everest
Printer.
Voltage Selector Switch
The voltage selector switch on the Everest printer must be set to match the AC voltage
from the outlet. Selections are 110 VAC or 220 VAC.
Mode Switch
The Mode Switch is to set the operational mode of the Everest printer. The accepted
positions are '0' and '1'. After changing the mode switch, the printer must be powered
on again to recognize the change. The recessed line on the switch indicates the selected
mode.
Power Switch
Voltage Selector Switch
Mode Switch
Recessed Line
12