Service Menu - Miller Big Blue Duo Pro 700 X Owner's Manual

6-4.

Service Menu

Menu Item
HOT STRT
(Only accessible in SMAW
processes)
AUTO CRTR
(Only accessible in GTAW
processes)
DIG RNGE
HOUR MTR
OIL HOUR
OIL SET
OIL RSET
VRD*
SOFT WARE
FACT RSET
STUK STIK
*On Side A, user must first select whether to apply settings to Side A only or to both sides.
OM-282302 Page 22
�
Complete Parts List is available at www.MillerWelds.com
1
2 3
Selectable Item Option(s)
RAMP OFF
RAMP 0.50
ATCR ON
ATCR OFF
0–200
0–100
– –
– –
50 HRS
RSET YES
RSET NO
VRD ON
VRD OFF
– –
RSET YES
RSET NO
RSET A/B
ON
OFF
1
277074-C
Disables Hot Start option.
Sets time the current transitions from hot start to the preset current.
Factory preset is 0.5 seconds for both XX10 and XX18. Range is 0 to
1 second settable in 0.1 second increments.
Enables Auto Crater option.
Disables Auto Crater option.
Sets current limit above preset amperage between 0 and 200 amps
for XX10 or 0 and 100 amps for XX18.
Displays engine hours.
Displays remaining oil change hours before service is due.
Sets the starting hours for oil change period. Selectable from 50-1500
hours in 50 hour increments.
Resets oil change period to selected value. Unit is set to factory rec-
ommended period per engine manufacturer.
Oil change remaining hours do not reset.
Enables VRD (Voltage Reducing Device) option, lowering open-cir-
cuit voltage.
Disables VRD (Voltage Reducing Device) option.
Displays the current revision of firmware installed.
Resets all Side A settings to factory defaults.
All Side A settings remain at previous settings.
Resets all Side A and Side B settings to factory defaults.
Enables Stuk Stik. Reduces current to min. when electrode is
shorted.
Disables Stuk Stik. Current stays at Dig current when electrode is
shorted.
1 Adjust Control/Select Button
Press and hold control for 5 seconds, then re-
lease to access the Service Menu. Rotate the
knob to scroll through the menu items. Press
and release the control to access the options
and information within each menu item.
Rotate the control counterclockwise to de-
crease the value or select NO/OFF. Rotate
the control clockwise to increase the value or
select YES/ON.
Press and release control to save selection.
After 5 seconds of inactivity, the menu will
time out and the selection will not be saved.
Description
OM-282302 Page 43