Service Menu - Miller Bobcat 200 Air Pak Diesel Owner's Manual

6-4. Service Menu

Menu Item
HOUR MTR
ENG OIL
COMP OIL
RPM DISP
MIN PRES
MAX PRES
SOFTWARE
FACT RSET
OM-281710 Page 32
.
A complete Parts List is available at www.MillerWelds.com
Selectable Item
Option(s)
− − Displays the current engine hours.
OIL HOUR Displays the current oil change countdown.
OIL SET Sets the oil change interval.
OIL RSET Resets the oil change countdown.
OIL HOUR Displays the current oil change countdown.
OIL SET Sets the oil change interval.
OIL RSET Resets the oil change countdown.
− − Displays current engine RPM.
90 psi up to 10 psi less than Minimum pressure to start air compressor (adjustable in 1 psi increments).
max pressure
175 psi down to 10 psi Maximum pressure to stop air compressor (adjustable in 1 psi increments).
greater than min pressure
− − Displays the current revision of firmware installed.
RSET YES Resets all settings to factory defaults.
RSET NO All settings remain at previous settings.
1 Adjust Control/Select Button
Press and hold Adjust Control/Select
button for 5 seconds, then release to
access the Service Menu. Rotate the
knob to scroll through the menu
items. Press and release the control
1
to access the options and informa-
tion within each menu item.
Rotate the control counterclockwise
to decrease the value or select NO/
OFF. Rotate the control clockwise to
increase the value or select YES/
ON.
Press and release control to save se-
lection. After 5 seconds of inactivity,
the menu will time out and the selec-
tion will be saved.
Description
281606-A