Configuring The Device - Siemens SIMATIC NET RUGGEDCOM RSG909R Installation Manual
Rugged ethernet switches
Hide thumbs
Also See for SIMATIC NET RUGGEDCOM RSG909R:
- Installation manual (54 pages) ,
- Installation manual (52 pages) ,
- Installation manual (52 pages)
Table of Contents
Advertisement
Device Management
3.2 Configuring the Device
device's IP address. The factory default IP address for the RUGGEDCOM RSG909R is
https://192.168.0.1.
For more information about available ports, refer to "Communication
Ports" (Page 27).
3.2
Configuring the Device
Once the device is installed and connected to the network, it must be configured.
All configuration management is done via the RUGGEDCOM RSG909R interface.
For more information about configuring the device, refer to the "RUGGEDCOM ROS
Configuration Manual" associated with the installed software release.
26
RUGGEDCOM RSG909R
Installation Manual, 04/2023, C79000-G8976-1388-17
Advertisement
Table of Contents
Need help?
Do you have a question about the SIMATIC NET RUGGEDCOM RSG909R and is the answer not in the manual?
Questions and answers