Fitting The Scanner Wires - Olivetti d-Copia 3001MF Service Manual

(2-2) Fitting the scanner wires

NOTE
When fitting the wires, be sure to use those specified below.
Machine front: (P/N: AVGR00575W), gray
Machine rear: (P/N: AVGR00574S), black
Fitting requires the following tools
Two frame securing tools (P/N AVGR03672L)
Two scanner wire stoppers (P/N 417928N)
Procedure
1. Remove the screw and remove the scanner
wire drum gear.
2. Remove the stop ring and bush from the
front of the scanner wire drum shaft.
3. Remove the scanner wire drum shaft from
the scanner unit.
Y112040-6
Screw
Scanner wire drum gear
Bush
Service Manual
Figure 1-5-38
Scanner unit
Scanner wire drum shaft
Stop ring
Figure 1-5-39
2K5
Bush
1-5-21