Remote controller mode: "Normal"
Remote controller modes: "Alarm only" and "Supervisor"
BRC1H82W+K+S
Madoka wired remote controller
4P596268-1A – 2022.02
INFORMATION
Removing the bonding information makes the controller forget all previously bonded
mobile devices. When removing the bonding information from a remote controller,
also delete the bonding information from your mobile device's Bluetooth list. Failure
to do this may result in unsuccessful future bonding.
1 From the home screen, press
2 Use
and
to navigate to the Bluetooth menu.
3 Press
to enter the menu.
4 Press
to remove the bonding information from the remote controller.
Result:
1 From the home screen, press
screen appears.
2 From the information screen, press
pressed until you enter the installer menu.
3 Use
and
to navigate to the Bluetooth menu.
15
to enter the main menu.
and keep it pressed until the information
and
simultaneously and keep them
About the app
|
Installer and user reference guide
97