Daikin Madoka BRC1H82K Installer And User Manual page 117

Wired remote controller
Hide thumbs Also See for Madoka BRC1H82K:
Table of Contents

Advertisement

Unit number
Filter auto clean
AirNet address
Group address
Filter notifications
BRC1H82W+K+S
Madoka wired remote controller
4P596268-1A – 2022.02
Change the unit number of the indoor unit(s). To configure individual indoor units,
these units require a unit number. The unit number of an indoor unit is its ranking
in the list. To give a unit a new unit number, change its ranking by either moving it
to an empty slot, or switching it with another indoor unit. If you need help
identifying physical indoor units, tap an indoor unit's fan icon to make that indoor
unit's fan operate.
INFORMATION
To use this function, it is required that the indoor units are equipped with a self-
cleaning decoration panel (optional accessory).
Enable automatic indoor unit filter cleaning operation and set a timespan for it.
Reset dustbox maintenance timer
When it is time to empty the self-cleaning decoration panel's dustbox, the app
displays a notification in the operation screen. Empty the dustbox and reset the
notification.
Assign AirNet addresses to the indoor and outdoor units, this to connect the
system to the AirNet monitoring and diagnostics system. First select a unit by way
of its unit number, then assign it an AirNet address.
Assign addresses to the indoor units, this to control the system with central control
equipment. You can assign an address to the group of indoor units connected to
the controller, and to indoor units individually.
Dismiss notification
The app displays a notification in the operation screen when it is time to perform
one of the following filter-related maintenance activities:
Replacement of indoor unit filter.
Cleaning of indoor unit filter.
Cleaning of indoor unit element.
Perform the required maintenance, then dismiss the notification.
INFORMATION
For more information on indoor unit maintenance, see the operation manual of the
indoor unit.
Reset notification timer
Filter maintenance due time is controlled by timers. The app sends out a
maintenance notification each time a timer expires. It is possible to reset these
timers.
15
About the app
|
Installer and user reference guide
117

Advertisement

Table of Contents
loading

This manual is also suitable for:

Madoka brc1h82wMadoka brc1h82s

Table of Contents