Daikin Madoka BRC1H82K Installer And User Manual page 120

15 | About the app
Test operation
Installer and user reference guide
120
A
A Inactive backup unit
B Unit in error
INFORMATION
This function can only be used when the indoor units are in group control.
INFORMATION
▪
To let the backup unit reach its cooling/heating capacity, an overlap period is
included in which all indoor units are active. For more information, see
unit field settings" [
▪
The rotation order depends on the set unit number. For instructions on how to
change the indoor units' unit number, see
Perform an indoor unit test operation. During the test run, the indoor units cycle
through various operation modes and functions to check if they are ready for
operation.
When
Only activate the test operation after the following is completed:
▪ Installation of refrigerant piping;
▪ Installation of drain piping;
▪ Connection of electrical wiring.
Typical workflow
Performing a test operation typically consists of the following stages:
1 Activating the test operation (Madoka Assistant app),
2 Testing the indoor unit functions according to the instructions set out in
perform a test operation" [
3 Deactivating the test operation (Madoka Assistant app),
4 Checking the error history for possible errors.
5 If applicable, fixing the causes of those errors.
6 Repeating the procedure if required.
INFORMATION
This function is only available for Sky Air indoor units.
A
A
B
4
73] (cfr. field setting 1E-7).
"Unit
4
121],
"Indoor
number" [ 4 117].
BRC1H82W+K+S
Madoka wired remote controller
4P596268-1A – 2022.02
"To